JLR-600 Melt Blown Machine Non woven Fabric for BFE95 Face Mask
JLR-600 Melt Blown Machine Non woven Fabric for BFE95 Face Mask
1. General Specification
Dimension mm | Weight kg | Source | Power |
8000*3500*2500 | 2500 | 380V 3 phase | 60-100kW |
2. Processing Flow
3. Technical Specification
Type | Spinneret plate | width of cloth | Daily capacity kg | |
JLR-600 Melt Blown Non-woven Production Line | 600 Spinneret plate | 175mm*3/300*2 | 400 | 25g/㎡ |
4. Machine Features
1) Two sets of 45 type extruder, single screw with diameter of 45mm. Length diameter ratio is 28:1. Equipped with drying hopper
2) Two sets of spinnerets plate with an aperture of 0.15mm, a positive and negative tolerance is 0.002mm and degree of finish of hole within Ra0.4
3) Two mesh forming machines with height range of 100mm, frequency conversion and speed regulation with negative pressure fan. Wind pressure 378-315 total pressure air volume 1395-2300 m³/h
4) High power and high efficiency electrostatic electret equipment
5) Coiler 2 sets with coiling diameter of 600-800mm, with slitting disc knife
6) Equipped with 4 sets of air expansion shafts for coil change (2 sets for standby coil change) with winding diameter of 600-800mm
7) Equipment advantages are modularized as a whole, which can be produced by plug-in
